90-22512, Hui'an Road, Liangxi District, Wuxi City

Q235NH Carbon Steel Plate

Is poured with molten steel, cooled and pressed into flat steel. It is flat, rectangular and can be rolled directly or cut from a wide strip of steel.

Tel:+86 18018372311

Email:[email protected]

Whatsapp:8618018372311

Product Description

The width of the sheet is 500~1500 mm; The width of the thickness is 600~3000 mm. 

Thin plates are classified by steel types, including ordinary steel, high quality steel, alloy steel, spring steel, stainless steel, tool steel, heat-resistant steel, bearing steel, silicon steel and industrial pure iron sheet, etc. 

According to the professional use, there are oil drum with board, enamel with board, bulletproof with board, etc. According to the surface coating points, there are galvanized sheet, tin plate, lead plate, plastic composite steel plate.


Specification:

Thickness of cold rolled steel plateThickness of galvanized steel sheetWearing plate+Corrosion resistance plateGalvanized coil+Galvanized coilCtion volumeStainless steel plateThick plate
0.1mm0.1mm1.5mm0.1mm0.1mm1.5mm18mm
0.2mm0.2mm2.0mm0.2mm0.2mm2.0mm20mm
0.3mm0.3mm2.5mm0.3mm0.3mm2.5mm22mm
0.4mm0.4mm2.75mm0.4mm0.4mm2.75mm25mm
0.5mm0.5mm3.0mm0.5mm0.5mm3.0mm28mm
0.6mm0.6mm3.5mm0.6mm0.6mm3.5mm30mm
0.7mm0.7mm3.75mm0.7mm0.7mm3.75mm32mm
0.8mm0.8mm4.0mm0.8mm0.8mm4.0mm35mm
0.9mm0.9mm4.5mm0.9mm0.9mm4.5mm40mm
1.0mm1.0mm4.75mm1.0mm1.0mm4.75mm42mm
1.2mm1.2mm5.0mm1.2mm1.2mm5.0mm45mm
1.3mm1.3mm5.5mm1.3mm1.3mm5.5mm48mm
1.4mm1.4mm5.75mm1.4mm1.4mm5.75mm50mm
1.5mm1.5mm6.0mm1.5mm1.5mm6.0mm52mm
1.6mm1.6mm6.5mm1.6mm1.6mm6.5mm55mm
1.8mm1.8mm6.75mm1.8mm1.8mm6.75mm58mm
1.9mm1.9mm7.5mm1.9mm1.9mm7.5mm60mm
2.0mm2.0mm7.75mm2.0mm2.0mm7.75mm62mm
2.1mm2.1mm8.0mm2.1mm2.1mm8.0mm65mm
2.2mm2.2mm8.5mm2.2mm2.2mm8.5mm68mm
2.4mm2.4mm8.75mm2.4mm2.4mm8.75mm70mm
2.5mm2.5mm9.5mm2.5mm2.5mm9.5mm72mm
2.6mm2.6mm9.75mm2.6mm2.6mm9.75mm75mm
2.7mm2.7mm10mm2.7mm2.7mm10mm80mm
2.8mm2.8mm10.5mm2.8mm2.8mm10.5mm82mm
3.0mm3.0mm11.5mm3.0mm3.0mm11.5mm85mm
3.2mm3.2mm11.75mm3.2mm3.2mm11.75mm90mm
3.4mm3.4mm12mm3.4mm3.4mm12mm100mm
3.5mm3.5mm12.5mm3.5mm3.5mm12.5mm110mm
3.6mm3.6mm12.75mm3.6mm3.6mm12.75mm120mm
3.8mm3.8mm13.75mm3.8mm3.8mm13.75mm140mm
4.0mm4.0mm14mm4.0mm4.0mm14mm150mm
4.2mm4.2mm14.5mm4.2mm4.2mm14.5mm160mm
4.5mm4.5mm14.75mm4.5mm4.5mm14.75mm170mm
4.6mm4.6mm15mm4.6mm4.6mm15mm180mm
4.8mm4.8mm15.5mm4.8mm4.8mm15.5mm190mm
5.0mm5.0mm16mm5.0mm5.0mm16mm200mm


Deficiency of carbon steel:

(1) Low hardenability.

(2) Relatively low strength and buckling.

(3) Poor tempering stability.

(4) Can not meet the requirements of special performance. 


Contact Us

We don't use cookies to personalize content and analyze our traffic. We only contact you through the form and email. Privacy Policy
×