90-22512, Hui'an Road, Liangxi District, Wuxi City

Galvanized Steel Sheet DX51D+Z

Galvanized sheet refers to a steel sheet coated with a layer of zinc on the surface. Galvanizing is an economical and effective anti-corrosion method that is often used.

Tel:+86 18018372311

Email:[email protected]


Product Description

DX51D+Z Galvanized Steel Sheet Features

1.Galvanized steel sheet is widely used in various environments and has a long anti-corrosion life. The anti-corrosion life is different in different environments.

The processing cost is low, and the anti-corrosion cost of galvanized steel sheet is lower than other paint coatings.

2.Durable, in the suburban environment, the standard galvanized anti-corrosion layer does not need to be repaired and can be maintained for more than 50 years. In cities or offshore areas, the standard galvanized anti-corrosion coating can be maintained for 20 years without repairs.

3.Good reliability. The galvanized layer and the steel are metallurgically combined and become part of the rigid surface, so the durability of the coating is relatively reliable.

4.The coating has strong toughness, and the zinc coating forms a special metallurgical structure, which can withstand mechanical damage during transportation and use.

5.Integrity protection: All parts of the plated parts can be galvanized, even in recesses, sharp corners and hidden places can be fully protected.

It saves time and effort. The galvanizing construction speed is faster than other coating construction methods, which can avoid the time required for on-site painting after installation.

Equivalent Material

GradeEuronormChina GBJapanese JISUS ASTM
EN 10346:2009GBT 2518-2008JIS:G3302-2005ASTM  A653M

Standard Specification

Width1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc
Length1000-6000 or Since the custom
SurfaceNormal (uneven) spangle/ Skinpassed spangle/ Regular spangle / Minimized spangles
Form Coils, Foils, Rolls, Plain coil, Shim coil, Perforated coil, Chequered coil, Strip, Flats,
Blank (Circle), Ring (Flange) etc.

Metal Content


Tensile strength :270~500MPa

Yield strength :-

Elongation :≥22%


Workpiece → Degreasing → Water Washing → Pickling → Water Washing → Dipping Helping Solvent → Drying and Preheating → Hot-dip Galvanizing → Finishing → Cooling → Passivation → Rinsing → Drying → Inspection

Contact Us

We don't use cookies to personalize content and analyze our traffic. We only contact you through the form and email. Privacy Policy